Guide :Tablets & eReaders : Pavilion TX1320US Tablet PC

What makes a computer powers up and not boot,after booting previously?

Posted by nobleduck100 on Jul 16, 2009

Research, Knowledge and Information :


My computer starts but does not boot - CPUs - Tom's Hardware


My computer starts but does not boot. ... they also do not indicate that the system is booting. ... No display on boot up computer; No boot; Wont boot, blinking power ...
Read More At : www.tomshardware.com...

How to Fix a PC Which Won't Boot (with Pictures) - wikiHow


How to Fix a PC Which Won't Boot. ... If your power supply doesn't work after testing it, ... Try booting your computer up with only the most basic hardware attached.
Read More At : www.wikihow.com...

How to Fix a Computer That Won't Turn On - Lifewire


... and you may or may not hear one or more beeps coming from the computer. How to Fix a Computer That Turns ... Boot Options menu. How to Fix a Computer ... up to ...
Read More At : www.lifewire.com...

Computer Powers on, But Does Not Boot Up | Bios | Booting


My computer has power but wont turn on Computer not booting up Computer not booting Computer powers on, but does not boot ... and makes a "dial tonish ...
Read More At : pt.scribd.com...

HP and Compaq Desktop PCs - Computer Does Not Start (Windows ...


HP and Compaq Desktop PCs - Computer Does ... The computer powers on but makes beeping sounds or locks up ... If the "Advanced Boot Options" screen does not ...
Read More At : support.hp.com...

Why won't my Windows computer start? - Indiana University


... make sure the computer is getting power. ... If the computer lights up and beeps, ... If the boot failure occurs after you have just installed or moved a ...
Read More At : kb.iu.edu...

How to possibly fix a PC that will turn on but will not beep ...


Sep 13, 2012 · ... the computer does not enter POST and does not boot ... and then powering up, and this until the PC beeps at boot) ... If your computer powers on ...

10 things you can do when Windows XP won't boot - TechRepublic


If your computer powers up ... here are 10 things you can do when Windows XP won't boot. ... [Delete] to reboot the computer. Once the system begins booting from ...
Read More At : www.techrepublic.com...

Computer Does Not Boot to Microsoft Windows 7 | Dell US


Verify the Computer Finishes Initial Power-Up ... Refer to the Dell knowledge-base article What is BIOS and How to ... If your computer does not boot to ...
Read More At : www.dell.com...

My computer powers on but doesn\\'t boot to BIOS or Windows ...


My computer powers on but doesn't boot to BIOS or Windows. Motherboard light comes up after powering the system on and all the fans also run fine. Its just that HDD ...
Read More At : www.tomshardware.com...

Suggested Questions And Answer :


What makes a computer powers up and not boot,after booting previously?


Unplug your laptop and then remove the battery. Replace the battery and start it up. IT should now be reset and work. If it still does not work you have a more serious issue which will require a technician.
Read More At : Pavilion TX1320US Tablet PC...

HP TX1320US not powering up .. seems dead..


The problem is in the GPU this defective chp is verheating and causing the WLANt fail and then it gets the solder joints loose on the board causng no video. It is a rather easy fix if yu are ok with removing your own motherboard. If interested I am willing to do the fix for anyone that has one of these machines. I have one and completed the fix on mine and 4 other machines. If interested email me at [email protected] thanks and good luck.
Read More At : Pavilion TX1320US Tablet PC...

PC powers up but does not boot up, nothing but a blank screen and the sound of the cooling fan.


The first step would be to make sure the computer is off, unplug any and all devices from the system, as well as the power cord, then flip the computer over, and remove the battery. With all devices and power sources removed, flip the computer back over, and hold the power button in the on position for approximately 20 seconds (this is what's called a "power reset"). After that has finished, plug only the power adapter into the computer (leave the battery unplugged) and attempt to turn the computer on this way. If this works, then it may be either the battery or one of the devices plugged into the computer that may be causing the problem. If this doesn't resolve it, then the other step that you can take is to try removing the RAM, Hard Drive and Wireless LAN cards inside each of the panels at the bottom of the unit (you will need to have a #0 or #1 philips screwdriver handy to remove the protective panels). Also make sure that you are in a clean environment when handling these parts by hand, as static electrivity can damage the parts and void your warranty, if you have one. Always make sure that you are grounding yourself somehow when handling these parts (usually touching a metal panel inside the computer will discharge any electricity in your body without damaging components, just don't touch an actual component). If you can remove all of the internal workings of the laptop, again, plug only the ac power in, and try turning on the computer. If it works, the computer should begin emitting long beeps, which denotes a "No RAM installed" error. If it doesn't resolve the issue and you don't hear long beeps, then you have a motherboard failure, and should seek the assistance of an authorized HP repair center (most likely through your place of purchase, or by calling HP directly at 1-800-HP INVENT). If you hear the long beeps though, insert one of your sticks of RAM, and again, turn the computer on with just the power adapter. If you see the HP splash logo on your screen, then chances are it's the other stick of RAM that has failed, and you will need to get it replaced. If it doesn't resolve the issue, then switch the sticks of RAM and try again. The idea here is to try and isolate the fault to a single part, and replace that one part. If you are not familiar or comfortable in removing these components, please seek the assistance of a certified technical specialist from one of your local computer stores.
Read More At : Pavilion TX1320US Tablet PC...

My HP Pavilion tx1320us laptop won't boot - HP Pavilion TX1320US Tablet PC


Check that the fan is working correctly and that the machine is not getting over-heated.try to plug it to the power and take the battery out- see if now it boots. if so then your battery is dead and you need to replace it
Read More At : Pavilion TX1320US Tablet PC...

Tablet wont boot into anything but screen with horizontal lines..just got it today and charged battery and now i get nothing?


Holding the power button down for 10-15 seconds is considered a hard reset on most tablets. If it still won't load you can try doing a factory restore.Make sure the tablet is powered offBriefly tap the power button once, then hold the power button and volume down until you get the boot menuThere should be an option to factory reset or something to that affect
Read More At : Tablets & eReaders...

No icons or taskbar after booting.


Have you tried a safe mode boot (press F8 just before the win start screen and choose safe mode) to see what happens and check for the installed programs. Also try in safe mode with network, update yor antivirus and do a full scan.Stelios.
Read More At : Siemens Stylistic 3400 Tablet PC...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.everythingabouttablets.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1802 seconds