Guide :Tablets & eReaders : Tablets & eReaders

Missing boot manager

Hp laptop. Pavillion TX1000 with swivel screen. Cannot load fresh copy of windows vista using a store bought copy of vista home premium because the computer will not load from the DVD drive and is displaying the missing boot manger over and over. any ideas.

Research, Knowledge and Information :

Missing Boot Manager - Microsoft Community

I'm running Vista on a 3-year old Dell Dimension E521. Suddenly it won't boot (goes to "Windows Error Recovery"), and safe mode doesn't start either. From the Boot ...
Read More At :

BOOTMGR is Missing: Fix for Windows Vista, 7, 8, 8.1, 10

Get the fix for "BOOTMGR is Missing" boot error in Windows Vista, Windows 7, Windows 8, Windows 8.1, or Windows 10 Explained below are the most common
Read More At :

Restore boot manager when it is missing or compressed ...

Windows Vista will fail to boot if it cannot find the files used to load the boot manager.
Read More At :

Boot manager is missing, will not boot without the windows 7 ...

Sep 15, 2012 · Hello . Please try this: 1- boot the windows 7 CD. 2- repair. 3- click on the cmd option. 4- diskpart list volume. 5- make sur that c:\ is referencing the ...
Read More At :

BOOTMGR is missing System Restore HOW TO FIX - YouTube

Jan 21, 2014 · BOOTMGR is missing Press Ctrl +alt + Del to restart startup repair System recovery HOW TO FIX - vista recovery - xp boot disk - bootmgr is missing vista ...

Missing Windows 7 Boot Manager Fixes - Bright Hub

Aug 09, 2010 · Boot Manager Related Problems. Sometimes when your Windows 7 starts up you may get a message saying that “BOOTMGR is missing" If it is missing, it won ...
Read More At :

Fixing "BOOTMGR is missing" Error While Trying to Boot ...

If your Windows 7 or Vista computer has encountered the dreaded “BOOTMGR is missing” error, you aren’t alone. If the problem isn’t hardware related you can ...
Read More At :

Fix “bootmgr is missing” in Windows 7, 8, 10 (2015 Update)

The dreaded message bootmgr is missing still exists today, but luckily there are some easy solutions that can help you to fix your boot manager and launch your
Read More At :

How To Fix “BOOTMGR is missing” Error in Vista and Windows 7 ...

Fixing the "BOOTMGR is missing" error isn't too hard; ... So I tried many things like to changing the boot device ... open the recovery manager screen as was done in ...
Read More At :

How to Install Windows XP When Bootmgr Is Missing

Bootmgr, commonly known as boot manager, is the code that provides your computer with instructions on how to boot into the operating system. If bootmgr is missing ...
Read More At :

Suggested Questions And Answer :

Proscan tablet plt7223g. NAND flash is recognized and labled as sdcard under app manager, can't load anything onto real sdcard

I suggest you use file explorer,or if your device has a filemanager it should work
Read More At : Tablets & eReaders...

I bought the proper matching two 1Gig sticks of memory to upgrade my 2G mHz TC4200. I installed them and it wouldn't boot, so I swapped back the 1G stick to the original 512mHz chip and it booted. Then I re and re'd the two new 1G sticks and it booted but when I installed the 2 of the 1G sticks, again it wouldn't boot. I'm using one of the 1G sticks and the 512 stick together and it operates fine. Either of the 1G sticks works with the 512 stick but not both of the 1G sticks together. Is there something I am not doing ? Maybe there is an adjustment in the bios or somewhere in the XP Pro Tablet OS I'm missing. HELP!!! Thanks, Rob.

Ok, Rob, did you buy the memory from Compaq/HP? Or is it a 3rd party set (ie. Viking, PNY, etc.)? Sometimes, Compaq/HP computers are VERY picky about the specifications of the memory that the mother boards will use. If you bought them from a 3rd party vendor, I would recommend taking them back and exchanging them for another brand or even just another set of sticks, but, before we go that route, let's try something else. Install a 1gb stick and the 512Mb stick and then go into the BIOS and see how much ram is being registered there. If it reads all 1.5Gb of ram, then we know it is something else, if not, then we have somewhere else to look. Assuming the BIOS registered the full amount of ram, try removing the 512Mb stick and then boot the computer, enter the BIOS and see if it is reading the 1gb stick properly. Assuming it did register the 1gb properly, swap the 2 1gb sticks out and repeat. If it did NOT register the lone 1gb stick, try moving the 1 gb stick to the other socket, and checking the BIOS again. If that works, then swap the 1gb sticks out, repeat the BIOS check. Assuming that after you swap out the 2 sticks and they both work as lone sticks, go back into the BIOS and look for an advanced page or an option to turn on a "Diagnostic Mode" or "Memory Test", and run the memory test on each stick- one sitck at a time, to see if there is a minor/major memory addressing issue, with either stick. If they both pass individually, then, try reinstalling them both together and check to see if you can reach the BIOS with them both in place. If not try putting the 512 in the 0 or first memory slot and the 1gb in the second slot, then repeat the memory test, swap the 1gb sticks again, and repeat the memory test on the second stick- (the thinking here is that if it is not the memory sticks themselves, perhaps it is the motherboard or one of the sockets for the ram that is bad).If you can reach the BIOS with both 1gb sticks in place, but, not actually boot to the operating system, then it is possibly a timing issue- this SHOULD BE AUTOMATICALLY configured, but, if you are an overclocker or a "performance wonk" you may have changed a relevant setting in the bios that controls the speed at which the memory and the processor interact. Or it could be a problem with windows hardware monitor not accepting the changes to the amount of memory in the machine. To test this possibility try going into "safe mode" at boot up, after the BIOS screen/Compaq logo has come and gone.If you can boot into safe mode and not into regular mode, it is a problem with something in windows. Sometimes, just booting into safe mode alone will fix it, sometimes, it is necessary to run the restore DVD on the computer to fix the problem windows is having/ or alternatively reinstall windows without running the restore DVD, using this method will usually fix windows, with out deleting all of your data. You might have to reinstall a few programs afterward, but, your pictures, mp3s, document files, etc. will still be on the drive. Running the restore DVD almost always deletes your data, so USE THAT SOLUTION AS A VERY LAST RESORT, ONLY AFTER YOU HAVE TRIED EVERY other option I have given you. Good luck, and hope this helps. 
Read More At : Compaq tc4200 Tablet PC...

I have a trio stealth tablet and i locked myself out by fogetting the password, ive tried to factory reset it by holding down power button and volune up buttkn till boot menu comes up but it never get

Restart the device and power it on while holding the power button and volume down until the boot screen clears, keep holding the volume down key as this will allow you to get to the root settings and wipe/cache partion resets and delete user install data. :-)
Read More At : Tablets & eReaders...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.2206 seconds