Guide :Tablets & eReaders : Pavilion TX1320US Tablet PC

PC powers up but does not boot up, nothing but a blank screen and the sound of the cooling fan.

MY HP Pavilion TX13210US Powers up but does not boot up, just a blank screen.

Research, Knowledge and Information :


HELP!!! ... Computer PC Powers and Turns on, but Doesn't Boot ...


... but the monitor screen always remained blank ... when normally the PC does work, there is a beep sound ... solved [HELP again] PC powers up but doesn't boot ...
Read More At : www.tomshardware.com...

How to possibly fix a PC that will turn on but will not beep ...


Sep 13, 2012 · ... but NO image or text appears on the screen and NO ... does not enter POST and does not boot ... up, and this until the PC beeps at boot) ...

Computer Has a Black Screen in Windows and Will Not ... - Tips4pc


When the computer will not boot up, it sound like it is booting as the ... i start my pc only the fan and the ... turn it on the screen just stays blank ~ nothing.
Read More At : tips4pc.com...

PC not starting up. No BIOS, just black screen. - Motherboards


PC not starting up. No ... There's just black screen when I start it. Not even does the BIOS ... from the jumper and it hit the back fan which does spin ...
Read More At : www.tomshardware.com...

Desktop does not start, fan makes a lot of noise - HP ...


... the fan makes a lot of noise and the desktop doesn't start up (black screen, ... Does the HDD spin up? Does it sound ... fan then the culprit of the pc not ...
Read More At : community.spiceworks.com...

Computer Does Not Boot Up (CPU Fan, screen) - Tom's Guide


Computer Does Not Boot Up (CPU Fan, screen ... does not power up,Display does not powers up,checked hard disk ... up, but no boot/no fan/blank screen ...
Read More At : www.tomsguide.com...

System won't power up, but cpu fan is running [Solved] - CCM


System won't power up, but cpu fan is ... Computer powers up but nothing on screen ... came on like a jet engine and the PC didn't start and the monmitor was blank.
Read More At : ccm.net...

HP Notebook PCs - Troubleshooting Black Screen Displays with ...


HP Notebook PCs - Troubleshooting Black Screen Displays with ... When a Computer Does Not Start Up or Boot ... is available and the sound of a fan or ...
Read More At : support.hp.com...

Laptop BLACK screen/ No display with Power light & Fan ON


Laptop BLACK screen/ No display with Power light & Fan ... Got Black Screen but all other light's are on. no BOOT but ... power light on but no fan no hard drive ...
Read More At : www.tomsguide.com...

Why won't my Windows computer start? - Indiana University


Using System Recovery Options in Windows 7 and Vista. In Windows 7 and Vista, you can use the installation disc to access the System Recovery Options menu.
Read More At : kb.iu.edu...

Suggested Questions And Answer :


PC powers up but does not boot up, nothing but a blank screen and the sound of the cooling fan.


The first step would be to make sure the computer is off, unplug any and all devices from the system, as well as the power cord, then flip the computer over, and remove the battery. With all devices and power sources removed, flip the computer back over, and hold the power button in the on position for approximately 20 seconds (this is what's called a "power reset"). After that has finished, plug only the power adapter into the computer (leave the battery unplugged) and attempt to turn the computer on this way. If this works, then it may be either the battery or one of the devices plugged into the computer that may be causing the problem. If this doesn't resolve it, then the other step that you can take is to try removing the RAM, Hard Drive and Wireless LAN cards inside each of the panels at the bottom of the unit (you will need to have a #0 or #1 philips screwdriver handy to remove the protective panels). Also make sure that you are in a clean environment when handling these parts by hand, as static electrivity can damage the parts and void your warranty, if you have one. Always make sure that you are grounding yourself somehow when handling these parts (usually touching a metal panel inside the computer will discharge any electricity in your body without damaging components, just don't touch an actual component). If you can remove all of the internal workings of the laptop, again, plug only the ac power in, and try turning on the computer. If it works, the computer should begin emitting long beeps, which denotes a "No RAM installed" error. If it doesn't resolve the issue and you don't hear long beeps, then you have a motherboard failure, and should seek the assistance of an authorized HP repair center (most likely through your place of purchase, or by calling HP directly at 1-800-HP INVENT). If you hear the long beeps though, insert one of your sticks of RAM, and again, turn the computer on with just the power adapter. If you see the HP splash logo on your screen, then chances are it's the other stick of RAM that has failed, and you will need to get it replaced. If it doesn't resolve the issue, then switch the sticks of RAM and try again. The idea here is to try and isolate the fault to a single part, and replace that one part. If you are not familiar or comfortable in removing these components, please seek the assistance of a certified technical specialist from one of your local computer stores.
Read More At : Pavilion TX1320US Tablet PC...

Notebook runs for 5 minutes then shuts down


I think it is time for a new notebook
Read More At : HP Pavilion TX1000 Tablet PC Stylus Pen 439948B21...

HP tablet pc boot problem


The problem is with the lcd screen. Hp has used the cheapest lid switches available in the market.Therefore it offers a two yr extended warranty to all its customers. refer to the hp website or call its helpline
Read More At : Compaq tc1100 Tablet PC...

Screen goes blank (white), sometimes screen display will get big


You can update graphics driver, if that does not fix the issue check the display on external monitor. If the external monitor works fine you can isolate checking the display in BIOS Setup scree (Restart your computer and keep tapping F10 to getinto BIOS). If the same issue in BIOS, you may have to change display of the unit.
Read More At : Pavilion TX1320US Tablet PC...

I can't get any display on the screen of my pc.The power is working very well and all the led indicators are on. No sound during POST, and I have tried connecting a screen through the external screen port. But I still can't get any display. I need help and I need it real quick as this whole thing is affecting my work. Thanks, awaiting the best solution. NB: It's a HP pavilion Entertainment PC (Tablet)


please follow the following instructions i hope this helps Disconnect all peripheral devices and remove all USB devices and media cards. You want to test the computer not the accessories! Disconnect the AC power adapter, remove the battery, and then press and hold the power button for at least 15 seconds . Reconnect the AC power adapter (but do not connect the battery), Press the Power button, Look for glowing LEDs near caps lock and num lock keys, and Listen for sounds of a disk drive and fan turning
Read More At : Pavilion TX1320US Tablet PC...

When we turn on our Tecra M4 the "Windows was shut down improperly" screen sometimes comes up, but the arrow keys won't function to choose a start-up method, other times the LCD is blank and the cooling fan cycles high to low speed until it is shutdown using the power switch over-ride


You need to run a program like SPINRITE.EXE . you can dl online from a torrent site. it will fix your problems.
Read More At : Tecra M4-S435 Tablet PC...

My HP Pavilion tx1320us laptop won't boot - HP Pavilion TX1320US Tablet PC


Check that the fan is working correctly and that the machine is not getting over-heated.try to plug it to the power and take the battery out- see if now it boots. if so then your battery is dead and you need to replace it
Read More At : Pavilion TX1320US Tablet PC...

No display. The tablet powers on, ut the screen is not showing anything. I also had a cooling fan attached via usb and while the display problem began, the cooling fan is not longer powering on via the usb port.


From what I"m reading in your notes it seems to me that you are having a board issue lights out. No power to the USB as well as dark screen try pressing F8 and during a reboot. If you are able to get to the BIOS set the BIOS to boot from CD or DVD as the first boot option under boot section order in most cases it is already the default setting. Also place the system recovery disc in the drive then go ahead and do a repair first. Then if this does not solve it then do a full install if you cannot even get to this part of it then I'm afraid it is more than likely the board went bad on you. I suggest this one goes to the shop for a review and let them handle it. It is defiantly a connection failure on the board. I really hate to say it. One last ditch would be to let it cool down completely for a while see if it turns on again after cooling. I have had that happen for me many times. I hope she comes back to life for you. John
Read More At : LifeBook T4210 Tablet PC...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.everythingabouttablets.net || Terms of Use || Contact || Privacy Policy
Load time: 0.1873 seconds