Guide :Tablets & eReaders : TOUGHBOOK CF-18 Tablet PC



Research, Knowledge and Information :

How to upgrade the memory in the Panasonic Toughbook CF-18 ...

May 13, 2013 · Upgrading the memory in the Panasonic Toughbook CF-18 laptop is fast and easy after watching our how to video. Watch all the videos in this playlist: http ...

ToughBook 18 Pentium M CF-18 (DDR2) RAM - Memory Stock

Upgrade your Panasonic Laptop with quality memory - Buy Panasonic ToughBook 18 Pentium M CF-18 (DDR2) Laptop RAM with lifetime warranty
Read More At :

Memory Upgrade to CF-18 | - Tablet PC ...

I have a Toughbook CF-18 and would like to either upgrade the existing memory or add more to enhance its performance. The operators manual doesn't...
Read More At :

Memory Upgrade for Panasonic Toughbook 18 Laptop

Memory Upgrade for Panasonic Toughbook 18 Laptop, Upgrade Toughbook 18 Memory with 100% compatible 18 Panasonic Laptop Memory RAM modules from
Read More At :

How to Install Memory on a ToughBook CF-19 | www ...

As you run multiple applications at once, your ToughBook relies on Random Access Memory (RAM) to provide the instant memory needed to keep your system running without ...
Read More At :

2GB RAM Memory for Panasonic Toughbook CF-18 Mk5 (CF-18N ...

Buy 2GB RAM Memory for Panasonic Toughbook CF-18 Mk5 (CF-18N) (DDR2-4200) - Laptop Memory Upgrade: Memory - FREE DELIVERY possible on eligible purchases

Adventures with Linux: Xubuntu on a Toughbook CF-18 - Bob ...

How to install and configure Xubuntu Linux on a Panasonic Toughbook CF-18
Read More At :

How to upgrade the memory in a Panasonic Toughbook CF-31

Buy with confidence: every refurbished Toughbook rugged laptop we sell comes with a limited lifetime warranty and industry leading customer service.
Read More At :

Suggested Questions And Answer :


On the Panasonic CF-18 the memory module is under the speaker assembly. You have to remove all six screws, unplug the speaker from the main board then remove the chrome plate to access the memory.
Read More At : TOUGHBOOK CF-18 Tablet PC...

How do you install the memory stick on a toughbook 18

It's under the speaker. Pull the speaker off and you will see it.
Read More At : TOUGHBOOK CF-18 Tablet PC...

HOW HANNSPREE tablet SN1AT7 (HSG1279) manage its memory?

Computer's speed [whether it be a desktop or laptop, whatever be] depends on many things. Even with the highest core speed computers too can hang, and go with little speed. In your case, it will be best to contact the authorized service center, or any skilled computer technician to resolve this problem. In most cases, a re-installation of the O/S will resolve the problem. Anyway, contact the authorized service center. It will be best.
Read More At : HANNS pad SN10T1...

How do I recover space from internal memory on restored Hip street Flare 2? NOT looking to restore lost content, only reclaim "lost/missing" memory space...cannot install anything at all, after factor

If you have done several factory restores, then the internal memory chip is probably damaged and not reading its full capacity.
Read More At : Tablets & eReaders...

How do install adobe flash player - Amazon Kindle Fire HD 7 inch Tablet with 8GB Memory 2nd Generation

Go to and install from there using wi fi
Read More At : Kindle Fire HD 7 inch Tablet with 8GB Memory 2nd Generation...

I bought the proper matching two 1Gig sticks of memory to upgrade my 2G mHz TC4200. I installed them and it wouldn't boot, so I swapped back the 1G stick to the original 512mHz chip and it booted. Then I re and re'd the two new 1G sticks and it booted but when I installed the 2 of the 1G sticks, again it wouldn't boot. I'm using one of the 1G sticks and the 512 stick together and it operates fine. Either of the 1G sticks works with the 512 stick but not both of the 1G sticks together. Is there something I am not doing ? Maybe there is an adjustment in the bios or somewhere in the XP Pro Tablet OS I'm missing. HELP!!! Thanks, Rob.

Ok, Rob, did you buy the memory from Compaq/HP? Or is it a 3rd party set (ie. Viking, PNY, etc.)? Sometimes, Compaq/HP computers are VERY picky about the specifications of the memory that the mother boards will use. If you bought them from a 3rd party vendor, I would recommend taking them back and exchanging them for another brand or even just another set of sticks, but, before we go that route, let's try something else. Install a 1gb stick and the 512Mb stick and then go into the BIOS and see how much ram is being registered there. If it reads all 1.5Gb of ram, then we know it is something else, if not, then we have somewhere else to look. Assuming the BIOS registered the full amount of ram, try removing the 512Mb stick and then boot the computer, enter the BIOS and see if it is reading the 1gb stick properly. Assuming it did register the 1gb properly, swap the 2 1gb sticks out and repeat. If it did NOT register the lone 1gb stick, try moving the 1 gb stick to the other socket, and checking the BIOS again. If that works, then swap the 1gb sticks out, repeat the BIOS check. Assuming that after you swap out the 2 sticks and they both work as lone sticks, go back into the BIOS and look for an advanced page or an option to turn on a "Diagnostic Mode" or "Memory Test", and run the memory test on each stick- one sitck at a time, to see if there is a minor/major memory addressing issue, with either stick. If they both pass individually, then, try reinstalling them both together and check to see if you can reach the BIOS with them both in place. If not try putting the 512 in the 0 or first memory slot and the 1gb in the second slot, then repeat the memory test, swap the 1gb sticks again, and repeat the memory test on the second stick- (the thinking here is that if it is not the memory sticks themselves, perhaps it is the motherboard or one of the sockets for the ram that is bad).If you can reach the BIOS with both 1gb sticks in place, but, not actually boot to the operating system, then it is possibly a timing issue- this SHOULD BE AUTOMATICALLY configured, but, if you are an overclocker or a "performance wonk" you may have changed a relevant setting in the bios that controls the speed at which the memory and the processor interact. Or it could be a problem with windows hardware monitor not accepting the changes to the amount of memory in the machine. To test this possibility try going into "safe mode" at boot up, after the BIOS screen/Compaq logo has come and gone.If you can boot into safe mode and not into regular mode, it is a problem with something in windows. Sometimes, just booting into safe mode alone will fix it, sometimes, it is necessary to run the restore DVD on the computer to fix the problem windows is having/ or alternatively reinstall windows without running the restore DVD, using this method will usually fix windows, with out deleting all of your data. You might have to reinstall a few programs afterward, but, your pictures, mp3s, document files, etc. will still be on the drive. Running the restore DVD almost always deletes your data, so USE THAT SOLUTION AS A VERY LAST RESORT, ONLY AFTER YOU HAVE TRIED EVERY other option I have given you. Good luck, and hope this helps. 
Read More At : Compaq tc4200 Tablet PC...

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
next Question || Previos Question
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || || Terms of Use || Contact || Privacy Policy
Load time: 0.1547 seconds